Installation of the GG2 Bus+ Bridgecard


	FIRST TURN OFF YOUR COMPUTER!!! 


Wait about 5 seconds.  Ground yourself before you begin to install your
GG2 Bus+ by touching a metal object, then by touching the metal chassis 
of your Amiga.  Find your owners manual and follow the instructions for
installing expansion cards in your Amiga to install the GG2-Bus+ card and
any PC card you want to use with it.  After reassembling your Amiga, turn
it on.  Use a program such as the AmigaDOS 2.0 tool "showconfig" or a 
shareware program such as "System Information", to look at what boards
are plugged into your Amiga.  You should see the GG2 Bus+ card listed as
having a manufacturer number of 2150, a product number of 1, and a serial
number of 2.  It will be occupying 1 Megabyte of AUTOCONFIG memory space.
The base address of the card should also be listed.  If all is well, you
are done with the hardware installation!  

Next, insert the GG2 Bus+ software disk into any drive, open the disk from
the Workbench and double-click on the "Install GG2 Bus+" icon to start
the installation procedure.  After answering the prompts and telling Installer
when to put the GG2 Bus+ software, you are ready to go.


If you are having trouble with your install, then check out  install problems  
or the  Help  for help, and the  Appendices 
section for specification information.